Hydraulic hose crimp is a combination of various construction machinery, forming a collection of various uses in the body of equipment, to achieve multi-function machine.

The hydraulic hose crimp is suitable for all kinds of mechanical high and low pressure oil pipe, air pipe, water pipe, cable joint, automobile air conditioning pipe, automobile power steering pipe, oil pipe, gasoline supply pipe, as well as construction accessories, daily hot water pipe withholding, widely used in vehicles, construction machinery, hydraulic machinery, welding and cutting equipment and other industries.

Daily operation instructions and maintenance of the Hydraulic hose crimp:

Instructions for use of Hydraulic hose crimp:

1. Add hydraulic oil.

2. Connect the power supply.

3, install the mold you need.

4, motor switch control motor.

5. Check whether the motor runs clockwise after starting.

6, fine adjustment should be used with the advance and retreat switch, clockwise rotation is large, otherwise is small, and then press the advance and retreat button, that is, stop working.

7. The "closing mold" of the retreat switch is shrinking, and the "opening mold" is retreating

8, the customer to disassemble magnetic switch cleaning, must be installed in accordance with the line diagram.

Maintenance of the Hydraulic hose crimp:

1. When the hydraulic oil in the tank exceeds the requirements of the hydraulic oil manufacturer, the effect is replaced, or the oil level table is visual. If the hydraulic oil has been oxidized and blackened, it must be replaced.

2. Often inject anti-wear lubricating oil into the moving surface of the mold base.

3. During the working time of the non-pressure tube machine, please cover it with dust proof to prevent sundries from falling into the mold base.